LG Electronics LMHM2237ST Installation Guide

Website: http://www.lg.comMICROWAVE OVENINSTALLATION INSTRUCTIONSPLEASE READ AND SAVE THESE INSTALLATION INSTRUCTIONS.MFL06206505

STEP 3: Prepare The Venting BlowerWALL-VENTING INSTALLATION:1. Remove one or two blower unit mounting screw(s) and oneor several blower plate mounting

STEP 3: Prepare The Venting Blower– 11 –ROOM-VENTING (Recirculating) INSTALLATION:1. Remove one or two blower unit mounting screw(s)and one or several

– 12 –STEP 4: Prepare The Wall & Upper CabinetTo avoid personal injury or property damage, do not attempt to install this microwaveoven if you can

– 13 –STEP 4: Prepare The Wall & Upper CabinetDrill The Holes In The Wall And Upper Cabinet.1. Drill holes on the circles. If there is a stud, dri

– 14 –STEP 5: Install The Mounting PlateCBAThe Oven Must Be Connected To At Least OneWall Stud.4. Attach the plate to the wall. To use spring toggle h

STEP 6: Attach The Oven To The Wall1. Carefully lift microwave oven and hang it on support tabs(See Figure 30) at the bottom of the mountingplate.Reac

Printed in China

– 2 –Your Safety FirstBEFORE YOU START• Proper installation is the installer's responsibility! Proper installation by a qualified technician or

Your Safety First• MAKE SURE YOU HAVE ENOUGH SPACE AND SUPPORT.– Mount the oven against a flat, vertical wall, so it is supported by the wall. The wal

– 4 –Parts, Tools, MaterialsTHE FOLLOWING PARTS ARE SUPPLIED WITH THE OVEN:NOTE: Depending on your ventilation requirements, you may not use all of th

– 5 –Parts, Tools, MaterialsClear Tape(for taping the templates to the wall)Phillips Screwdriver(for the screws)GlovesPencilFlat Blade Screwdriver(for

– 6 –STEP 1: Prepare The Electrical ConnectionImproper grounding could result in electric shock or other personal injury.1. Locate the grounded electr

– 7 –STEP 2: Prepare The Venting SystemTHIS OVEN MUST BE PROPERLY VENTED!NOTE: The ductwork you need for outside ventilation is not included with your

– 8 –STEP 2: Prepare The Venting SystemStandard FittingsNOTE: If the existing duct is round, you must use a rectangular-to-round adapter, with a recta

– 9 –STEP 3: Prepare The Venting BlowerYour microwave oven is shipped with the blower assembled for roof-venting. You need to adjust the blower if you